FREE SHIPPING with $125.00 purchase!
Some exclusions apply. See details below.
2 Door pop kit with 12 channel keyless entry
Quantity in Basket:
Shipping Weight: 8.00 pounds
Our best pop door kit ever!|
Complete pop door kit for remote controlled opening of 2 doors with shaved door handles. This kit comes with 2 heavy duty solenoids rated at 60 pounds, cables & hardware. This kit also includes a 12 channel remote controlled keyless entry system with 2, 5 button remote controls. Remote entry comes with prewired with external Tyco relays and heavy duty wiring. Internal relays don't cut it. External relays and heavy duty wiring send maximum voltage to your solenoids for maximum pull power! This unit also includes an ignition cutout which will not allow the door to be accidentally popped open while the ignition is "ON". The 12 channel keyless entry has 10 extra 500ma low level negative outputs which can be used for electric trunk release or other optional devices. These outputs require external relays such as our 8617 for most accessories. A good addition to any door pop kit is the lockable emergency entry kit (Cable-92012). This cable kit will give you an alternate way to open the doors in case of electrical failure.
This pop door kit can be ordered with or without door poppers. The base price shown is without poppers. We carry 3 door popper options. The standard stainless steel poppers, The Electric Life Thrusters (folded spring steel with double stick tape mounting) and the Electric Life Door Jammer which is a heavy duty popper designed to be mounted in the vehicles door jamb where it is less visible.
Want to add an electric trunk release?
Add the TK01-K trunk release solenoid and an 8617 relay.
If desired, the solenoids can be remotely mounted in the bottom or front of door using (CABLE-8K) Cable and housing kit listed in related items below.
- The solenoid body is 2.0 inches in diameter and 4 inches in length, not including the plunger.
- The plunger is 1 3/8 inches long in it's extended position and retracts 5/8 inch.
- The solenoid and bracket have a total installed height of 2 3/8 inches.
- The bracket is 3 inches wide.