Wireless Keypad Keyless Entry System. This system can be used to operate factory installed door locks or one of our MES power door lock kits. The keypad allows keyless entry to a vehicle by entering a programmable 3-7 digit code. The keyless entry can also open the trunk (if equipped with electric release). The control module has built in relays for the door lock interface. However, some vehicles may require additional relays or modules for door lock interface, depending on vehicle make and model. The keypad is 1 1/4 inch by 4 inch by 3/8 high. The keypad is attached to the door or other body panel with double stick tape. This unit interfaces with our MES door lock systems without the addition of any relays or extra components.
Note: Installation on some late model vehicles may require body computer interface (especially GM models). Most late model Chrysler vehicles need additional resistors to interface the body computer. Ask your installer or email us if you require assistance in determining if a module is needed. Advanced auto electrical skills are necessary for interface with vehicle computer systems.
We carry serveral interface modules which are listed on our Installation Accessories page.
Note: Wireless Keypad is an RF remote control device that is attached to door with double stick tape. If a permanently mounted original equipment style keypad keyless entry is required, see the Essex AKE-5 or Essex KE1701 in related products list.