Our best 2 door pop door kit ever!
Complete pop door kit for remote controlled opening of 2 doors with shaved door handles. This kit comes with 2 heavy duty solenoids rated at 60 pounds, cables & hardware. This kit also includes a 5 channel remote controlled keyless entry system with 2, 5 button remote controls. Remote entry comes with prewired with heavy duty external relays and wiring. Internal relays are designed to handle the light load of door lock actuators, not heavy duty solenoids!. External relays and heavy duty wiring send maximum voltage to your solenoids for maximum pull power! This unit also includes an ignition cutout which will not allow the doors to be accidentally popped open while the ignition is "ON". The 5 channel keyless entry is wired for use with 2 doors and can be used with 2 additional doors and a trunk if desired. Our 8617 relay is required for each additional door or trunk. A good addition to any door pop kit is the emergency entry kit with lock (CABLE-92012). This cable kit will give you an alternate way to open the doors in case of electrical failure.
This kit can be ordered with or without door poppers. The base price shown is without poppers. We carry 3 door popper options. The standard stainless steel poppers, The Electric Life Thrusters (folded spring steel with double stick tape mounting) and the Electric Life Door Jammer which is a heavy duty popper designed to be mounted in the vehicles door jamb where it is less visible.
Want to add an electric trunk release?
Our TK01-KIT is a complete trunk release kit. It comes with heavy duty Spal solenoid, cable assembly to remote mount solenoid and relay and wiring kit. Want something lighter? Add the TK01-K trunk release solenoid and an 8617 relay.
If desired, the solenoids can be remotely mounted in the bottom or front of door using (CABLE-8K) Cable and housing kit listed in related items below.
- The solenoid body is 2.0 inches in diameter and 4 inches in length, not including the plunger.
- The plunger is 1 3/8 inches long in it's extended position and retracts 5/8 inch.
- The solenoid and bracket have a total installed height of 2 3/8 inches.
- The bracket is 3 inches wide.